Racal Instruments 3155 Spezifikationen PDF herunterladen (Seite 77)

User Manual 3155

3-24 ArbConnection

Sweep

The Sweep group contains parameters for controlling sweep options.

To turn the Sweep function on and off, click on the State button in

this group. There are sub-groups in the Sweep block: Parameters,

Direction, Type, Mode and Slope.

Parameters – Allow adjustment of Sweep Stop and Sweep Time.

You can also place a marker at a position programmed by the Mark

parameter. To access the desired parameter, click on the button be-

low the parameters sub-group until the LED next to the required pa-

rameter turns on. The value associated with the lit LED is displayed

on the digital display. You can use the dial, keyboard, or the [

↑

] [

↓

}

keys to adjust the readout to the required setting. After you modify

the setting, press Execute to update the 3155.

Note

The normal color of the digital reading is dark blue. If

you modify the reading, the color changes to a lighter

shade of blue, indicating that the 3155 has not been up-

dated yet with the new parameter. Pressing Execute up-

dates the instrument and restores the color of the digital

readout to dark blue, indicating that the displayed value

is the same as the generator setting.

Also note that the digital readout has an autodetect

mechanism for high and low limits. You cannot exceed

the limits using the dial but you can if you using the

keypad. If you do, the program prevents download of il-

legal parameter and you are prompted to correct the set-

ting.

Direction – Use the buttons in this sub-group to program sweep di-

rection. Up selects sweep from the start to the stop sample clock set-

ting. Down selects sweep from the stop to the start sample clock set-

ting. Refer to Chapter 3 of this manual to learn more about sweep

operation.

Type – Use these keys to select sweep step from the two sweep

spacing options: linear and logarithmic.

Mode- The Mode sub-group selects one of the Sweep operating

modes. Choose between continuous, triggered and gated sweep.

Unlike the main trigger function, the trigger modes for the sweep

function operate in continuous mode. For example, if you place the

instrument in triggered sweep, the instrument idles at the carrier fre-

quency and execute one sweep cycle when triggered. Refer to the

appropriate section in this manual to learn more about triggered

sweep.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 203 204

Kommentare zu diesen Handbüchern

Keine Kommentare

Racal Instruments 3155 Spezifikationen Seite 77

Kommentare zu diesen Handbüchern